Sheyla

By Sheyla

LifeBuzz Staff

He Made The Apple On The Back Of His iPhone Light Up. Here’s How He Did It.

It's important to remember that the the two plates have connecting cables.

Only pry open the plate up to 90 degrees or the cables will break.

It's important to remember that the the two plates have connecting cables.

TheUnlockr / YouTube

Unscrew the metal plate over the screen cables.

Not every screw is the same size, this will be important to remember when you are screwing the plate back.

Unscrew the metal plate over the screen cables.

TheUnlockr / YouTube

Once you have done that you can gently disconnect the cables.

You can remove the long black battery. The battery is glued on so don't poke it just work on it with the pry tool to get it off.

Once you have done that you can gently disconnect the cables.

TheUnlockr / YouTube

You can now insert the light kit. Place the LED light on top of the Apple logo.

Apply the tape that was there before. You can also put the battery back on. Don't connect the cables right away though.

You can now insert the light kit. Place the LED light on top of the Apple logo.

TheUnlockr / YouTube

Use one of the sponges from the light kit and attach it to the light cable. It should look like the letter "t."

Connect the cable to the connectors.

Use one of the sponges from the light kit and attach it to the light cable. It should look like the letter "t."

TheUnlockr / YouTube

Page 2 of 3